Harrington-hoists-and-cranes AHM Hoist User Manual download pdf (Page 19)

Figure 3-6 Diagram for Mini Trolley Installation

3.9.2 Manual Trolley - Follow instructions in Owner’s Manual provided with the trolley.

3.9.3 Motorized Trolley - Follow instructions in Owner’s Manual provided with the trolley.

3.9.4 Hook Mounted to a Fixed Location - Attach the hoist’s top hook to the fixed suspension point.

3.9.5



Ensure that the fixed suspension point rests on the center of the hook’s saddle and

that the hook’s latch is engaged.

3.10 Optional Chain Container

3.10.1 Follow instructions below to install the optional chain container. Refer to Figure 3-7.

1) Insert the Bucket Arm Assembly into the notched openings on the Wheel Housing.

2) Loosely attach the Arm Holders to the Bucket Arm Assembly with the Bolt, Washers and U-Nut

provided.

3) Attach the Chain Container onto the Bucket Arm Assembly with the Socket Bolt BP, U-Nut and

Split Pin. Make Sure to Securely bent the Split Pin.

4) Tighten the Bolt and U-Nut on the Arm Holders.

5) Feed the Chain into the Chain Container beginning with the no-load end. Take care to avoid

twisting or tangling the Chain.



Do not use the Chain Container if any parts are damaged or if any

fasteners/hardware are missing.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 55 56

No comments

Harrington-hoists-and-cranes AHM Hoist User Manual Page 19