9
Table 2-3 Hook Dimension*
T = Top Hook
B = Bottom Hook
Units = inch
*Refer to Section 5.7 for inspection dimensions and limits.
2.3 Optional Equipment
2.3.1 Optional Latch Lock Hooks
The Bullard hook has a conventional hook shape with a special, heavy-duty, rotating, spring-
loaded, locking latch. The latch remains locked until it is released by the operator. Refer to Figure
2-6.
The Shur-Loc hook is a special design hook where the latch remains fixed and the hook swings
to unlock. The hook cannot be opened while a load is applied.
Installation of these hooks may change the headroom.
See Section 9.4, Parts List for a complete Latch Lock Hook part listing.
See Table 6-3 for yoke nut torque specifications.
Figure 2-6 Latch Lock Hooks
Comments to this Manuals